:	Jan 17, 2005

.

: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands. Raise and support the vehicle.

.

Remove the wheel and tire.

.

: The brake pad wear indicator sensor is easily damaged. Do not use a lever to remove the sensor. Use fingers only. RH side only: Disconnect the brake pad wear indicator sensor.

.

Remove the brake caliper lower bolt.

.

Remove the brake pads.   Rotate the brake caliper upwards.   Remove the two clips.

.

Remove the brake caliper upper bolt.

.

: Do not allow the brake caliper to hang on the brake hose. Tie the brake caliper housing aside.

.

Remove the brake caliper anchor plate.

.

Remove the guide pins and seals.

.

: Do not use compressed air to clean brake components. Dust from friction materials can be harmful if inhaled. Clean the caliper housing and anchor plate using brake cleaning fluid.

.

Clean and lubricate the guide pins.

.

Install the guide pins.

.

Install the anchor plate.   Tighten the bolts to 115 Nm (85 lb.ft).

.

Install the brake caliper housing and fit the top bolt.   Tighten the bolt to 35 Nm (26 lb.ft).

.

Install the brake pads.   Install the 2 clips.

.

Rotate the brake caliper downwards.   Tighten the bolt to 35 Nm (26 lb.ft).

.

Connect the brake pad wear indicator sensor.

.

Install the wheel and tire.   Tighten the wheel nuts to 140 Nm (103 lb.ft).